Cor-Ban 22 is an aerosolized version of the Cor-Ban 27L, (BMS 3-38). This product is designed to be a long lasting, high penetration, water displacing, corrosion inhibiting compound. The finished coating is soft and self healing.
Application:
The product can be applied by conventional airless or air-operated spray equipment. The coating should be applied at 1 mil film thickness. Aerosol application is available. All properties represented were achieved with a wet film thickness of 1.0 mils. One aerosol can covers approximately 90 ft2.
Features:
- High Penetration
- Detectable Film
- Solvent Removable
- Non-Sagging Film
- >4000 hours salt spray
- No-Cracking nor Flaking to -60F
- Physical Properties:
- Flash Point: 105°F
- Specific Gravity: 0.82
- Viscosity: 175 cps.
- Water Displacement: 0% Rust
- Non-Volatiles: 33%
- Material VOC: 538 gA
- Color: reddish-brown
- Solvent Type: Aliphatic
- Low Temp Flaking: Pass
- Penetration: BMS 3-23F pass
- Compatibility Cd, Mg, Al: Pass
- Miscibility wlLubricating oil: Pass
- Water Resistance: Pass
- Corrosion Resistance ASTM 6-1 17: >4000 hours on Steel
