Cor-Ban 23 Undyed is designed to be a long lasting, high penetration, water displacing, corrosion inhibiting compound for use on high profile aircraft substrates; upper edge floor beams, wheel wells, pressure deck and center wing sections. The finished coating is a clear, transparent, non-tacky protective barrier. Cor-Ban 23 Undyed offers the fast dry time and thin film and the long lasting corrosion inhibition properties.
Application:
The product can be applied by conventional airless, air assist, HVLP, and electrostatic spray equipment. The coating will self-level if applied on an incline to a dry film of 0.3-0.4 mils. Aerosol application is available. All properties represented were achieved with a dry film thickness of 0.3 mils.
Features:
- Water Displacing
- Fast Drying Non-Tacky Film
- High Penetration
- >3000 hours salt spray
- Non-Cracking and Flaking to -65F
- Clear, Transparent Film
- Solvent Removable
- Self-leveling to 0.3-0.4 mils dry film thickness
Physical Properties:- Viscosity (cps): 26
- Flash Point (ºC): 114°F
- Specific Gravity: 0.88
- Water Displacement: 0% Rust
- Non-Volatile: 42%
- Drying Time: 1 hour
- Color: Transparent and Clear
- Exfoliation: Pass
- Solvent Type: Aliphatic
- Low Temp Flaking: Pass
- Penetration: over 4 inches per hour per BMS 3-35
- Compatibility Cd, Mg, AI: Pass
